Festplatten
📅 Erstellt: 28.08.2026
🔄 Aktualisiert: 28.08.2026
Fujitsu MPD3043AT¶
The Retro Web Specs: TheRetroWeb
Hard Disk Sentinel: HDSentinel
Produktdatenblatt: Datenblatt
Anleitung: Manual
S.M.A.R.T Log:
❯ sudo smartctl -a /dev/sdd -d sat,12
[sudo] Passwort für marquisor:
smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.2.0-1-cachyos] (local build)
Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MPA..MPG
Device Model: FUJITSU MPD3043AT
Serial Number: 05037747
Firmware Version: DD-03-47
User Capacity: 4.325.529.600 bytes [4,32 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.5/5706
ATA Version is: ATA/ATAPI-4 (minor revision not indicated)
Local Time is: Fri Aug 28 08:51:34 2026 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 1440) seconds.
Offline data collection
capabilities: (0x03) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
No Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 032 Pre-fail Always - 20641
2 Throughput_Performance 0x0005 100 100 020 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 096 093 025 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 092 092 016 Old_age Always - 4754
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 020 Pre-fail Always - 3440
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Seconds 0x0012 001 001 020 Old_age Always FAILING_NOW 40889h+59m+02s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 087 087 020 Old_age Always - 2028
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000b 100 097 020 Pre-fail Always - 2018
SMART Error Log not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
The above only provides legacy SMART information - try 'smartctl -x' for more
DD Log:
❯ sudo dd if=/dev/sdd bs=4M status=progress | zstd -1 > backup.img.zst
113246208 Byte (113 MB, 108 MiB) kopiert, 7 s, 16,0 MB/s
dd: Fehler beim Lesen von '/dev/sdd': Eingabe-/Ausgabefehler
27+0 Datensätze ein
27+0 Datensätze aus
113246208 Byte (113 MB, 108 MiB) kopiert, 736,08 s, 154 kB/s
DDRescue Log:
Maxtor DiamondMax - 90340D2¶
Hard Disk Sentinel Specs: HDSentinel